楔压强度测试仪系列

您当前所在位置:网站首页 > 楔压强度测试仪系列 > 详细内容

楔压强度测试设备

     楔形压力强度试验机3/30        楔形压力强度试验机3/32

    楔压测试仪是测试标准楔铸样品VDG P340和类似类型的样品和材料。它通过机电加载力值的手段,使两个楔角是90°和刀尖半径0.2毫米的压力楔为楔压负荷的样本传送负载。
    通过力值测量装置测量和评估试样在被穿透和分裂过程。早在1934年,二卢德维克教授和J. Krystof发现在维也纳举行的有关断口表面能,在两个相反排列的刀片之间切断铸铁工件的负载可以直接关系到抗拉强度。这种方法跟拉伸试验比,其优点是简单直接,更能直接反应表面能。因此,这种测试为提供高铸件的质量提供一种必要的方法。
Wedge-type Compressive Tester 3/32
to test wedge compressive and tensile strength of cast
specimens according to the wedge-type compressive
principle.
Test load : 5 kN - max. 50 kN
Test cutting edge : 90 !a wedge angle
Wedge length : 40 mm
Peak wedge radius : 0,2 mm
Specimen diameter : 20 mm ?
Specimen thickness : up to 7 mm
Force measurement : through DMS force sensor
Speed : steadily adjustable
from 0,01 up to 30 mm/min.
Safety switch-off : each on the
- extremities of the crosshead and operating when
- exceeding the overload force.
Data transmission : USB
Dimensions : approx. 700 x 500 x 950 mm
Weight : approx. 200 kg netto
Colour : front panel light grey RAL 7035,
casing!fls outside dark grey RAL 7021
This device runs with measuring, controlling and
evaluating electronic unit. It has a LCD-display and a
numeric keyboard. The measuring results can be PC-
evaluated optionally.
A safety device prevents anybody from reaching the test
chamber and the specimens from splitting when testing.
Software package to perform the strength tests
comfortably and also some other testing methods on
materials on special testing devices of the company
K?gel Werkstoff- und Materialpr¤,fsysteme Gmb
main functions:
- communication between PC and testing device
- registration and storage of testing - and material data
- determination of test conditions
- registration and storage of data of the testing device
- control of the testing device
- control of the test sequence
- display of graphs (also multiple graph with poss
shifting the x-axis) with possibility to enlarge the
- determination and calculation of measured valu
including state-approved certificate
- structured display and storage of input- and me
data and results on a data carrier
- printing of test certificate
- configurable ASCII-output of test series

上一款:已经是第一篇了。 下一款:已经是最后一篇了。
版权所有:济南腾茂贸易有限公司版权所有  网 址:http://wwww.jntengmao.com  地 址:山东省济南市历城区七里河小区3-2-1102
电 话:0531-58590800/88060405  传 真:0531-58590300  邮 编:250100  电子邮箱:jntengmao@163.com